McCulloch chain saw Manual do Operador

GB Oper ator’ s man ual 6-26

GENERAL SAFETY PRECAUTIONS10 – English1153988-26 Rev.3 2012-03-09Will my hand always activate the chain brake during a kickback?No. It takes a certain

GENERAL SAFETY PRECAUTIONSEnglish – 111153988-26 Rev.3 2012-03-09Cutting equipmentThis section describes how to choose and maintain your cutting equip

GENERAL SAFETY PRECAUTIONS12 – English1153988-26 Rev.3 2012-03-091 Filing angle2 Cutting angle3 File position4 Round file diameterIt is very difficult t

GENERAL SAFETY PRECAUTIONSEnglish – 131153988-26 Rev.3 2012-03-09Lubricating cutting equipmentChain oilChain oil must demonstrate good adhesion to the

ASSEMBLY14 – English1153988-26 Rev.3 2012-03-09Fitting the bar and chainCS 340Check that the chain brake is in disengaged position by moving the front

FUEL HANDLINGEnglish – 151153988-26 Rev.3 2012-03-09FuelNote! The machine is equipped with a two-stroke engine and must always be run using a mixture

FUEL HANDLING16 – English1153988-26 Rev.3 2012-03-09Fuel safety• Never refuel the machine while the engine is running.• Make sure there is plenty of v

STARTING AND STOPPINGEnglish – 171153988-26 Rev.3 2012-03-09Starting and stoppingCold engineStarting: The chain brake must be engaged when the chain s

WORKING TECHNIQUES18 – English1153988-26 Rev.3 2012-03-09Before use: (35)1 Check that the chain brake works correctly and is not damaged.2 Check that

WORKING TECHNIQUESEnglish – 191153988-26 Rev.3 2012-03-09stacked logs or branches without first separating them. Only saw one log or one piece at a tim

2 – English 1153988-26 Re v .3 2012-03-09ABAmin 4mm(0,16’’)1234567893128103029AB1618252322212017192415C13261427253121014791168

WORKING TECHNIQUES20 – English1153988-26 Rev.3 2012-03-09Cut all the way through the log from above. Avoid letting the chain touch the ground as you fi

WORKING TECHNIQUESEnglish – 211153988-26 Rev.3 2012-03-09Finish the felling cut parallel with the directional cut line so that the distance between th

MAINTENANCE22 – English1153988-26 Rev.3 2012-03-09GeneralThe user must only carry out the maintenance and service work described in this Operator’s Ma

MAINTENANCEEnglish – 231153988-26 Rev.3 2012-03-09• Start the chain saw and apply full throttle. Release the throttle control and check that the chain

24 – EnglishMAINTENANCE1153988-26 Rev.3 2012-03-09Maintenance scheduleThe following is a list of the maintenance that must be performed on the machine

English – 25TECHNICAL DATA1153988-26 Rev.3 2012-03-09Technical dataNote 1: Noise emissions in the environment measured as sound power (LWA) in conform

26 – EnglishTECHNICAL DATA1153988-26 Rev.3 2012-03-09Guide bar and chain combinationsThe following cutting attachments are approved for the models McC

English – 3 1153988-26 Re v .3 2012-03-0911121314 15 161718 192021222324 25262728AABA

4 – English 1153988-26 Re v .3 2012-03-092930313233343839353736B42356179108

English – 5 1153988-26 Re v .3 2012-03-094043444546474849504142511230,5 mmRetreat pathRetreat pathDanger zoneDanger zoneDanger zoneFelling direct

INTR ODUCTION 6 – English 1153988-26 Re v .3 2012-03-09 Dear Customer , Thank y ou for choosing a McCulloch product. You are thereby part of a st

CONTENTS English – 7 1153988-26 Re v.3 2012-03-09What is what on the chain saw? (1)1 Cylinder cover2 Air purge3 Stop switch (Ignition on/off swit

GENERAL SAFETY PRECAUTIONS8 – English1153988-26 Rev.3 2012-03-09Before using a new chain saw• Please read this manual carefully.•(1) - (51) refer to fi

GENERAL SAFETY PRECAUTIONSEnglish – 91153988-26 Rev.3 2012-03-09We will willingly be of service and provide you with advice as well as help you to use